The mining newspaper for Alaska and Canada's North

New battery tech revives vanadium interest

Prices double over past year; potential deposit in SE Alaska

The strength and durability of steel and other alloys is greatly enhanced by adding a small amount of vanadium, currently the primary use of this critical mineral. While this toughness is legendary, the future of vanadium could rest in another set of more subtle traits that could make it the element of choice for large-scale storage of renewable energy generated by wind and solar.

"Vanadium is becoming more widely used in green technology applications, especially in battery technology," the U.S. Geological Survey penned in a 2018 report on critical minerals and metals.

Due to its importance to both the economic and strategic security of the United States, coupled with the fact that none of this high-strength metal is mined domestically, the alloying properties of vanadium alone would likely be enough to elevate vanadium to critical status.

The USGS estimates that roughly 9,800 metric tons of vanadium was consumed in the United States during 2018, a 13 percent increase over 2017. Approximately 93 percent of this vanadium was used in steel and other alloys.

Vanadium's potential as a battery metal, however, could be a market disruptor.

This emerging technology, coupled with an expected major increase in Chinese demand of vanadium for alloys, has resulted in soaring prices for this metal.

"Average 2018 vanadium pentoxide prices almost doubled compared with 2017 prices, and ferrovanadium prices more than doubled to $33 per pound in 2018 compared with 2017," USGS penned in its annual Mineral Commodities Summaries 2019.

Rising prices, coupled with growing demand from traditional and emerging applications, has prompted mineral exploration companies to identify new sources of this alloy-battery metal.

One such explorer, Northern Cobalt Ltd., has nabbed a large vanadium-bearing magnetite prospect in Southeast Alaska.

Model T to jet engines

Vanadium first gained its notoriety as steel strengthener in 1908, when Ford Motor Company decided to use vanadium steel to make its Model T more durable.

Inspired by racing cars being developed with it in Europe at the time, Henry Ford had many of the most stressed parts of the Model T – axles, crankshaft, springs and wheel spindles – forged from lighter, more durable and flexible vanadium steel.

These characteristics were used to tout "Ford superiority" in car building at the time.

"Vanadium is used throughout the Model T wherever strength is required," the iconic carmaker penned in a 1908 promotional flyer, "Watch the Fords go by".

Today, vanadium continues to be used in commercial and military applications where strength is required.

"The high-strength, low-alloy (HSLA) steels containing vanadium are widely used for the construction of auto parts, buildings, bridges, cranes, pipelines, rail cars, ships, and truck bodies, including armor plating for military vehicles," the USGS wrote.

In combination with chromium, niobium, manganese, molybdenum, titanium, and tungsten, vanadium also imparts its strength and durability to tool steels.

Many tools found in hardware stores are proudly stamped "chrome vanadium" to signify the quality of the tool.

While other metals could replace ferrovanadium steel alloys, it is typically not worth the costs and energy required to create steel with the same characteristics.

And, vanadium serves an irreplaceable alloying role in the aerospace industry, according to the USGS. This is because vanadium-titanium alloys have the best strength-to-weight ratio of any engineered material yet discovered.

"Vanadium, when combined with titanium, produces a stronger and more stable alloy, and when combined with aluminum produces a material suitable for jet engines and high-speed airframes," USGS inked in its critical minerals report. "No acceptable substitutes exist for vanadium in aerospace titanium alloys."

Batteries could be the future

While alloys currently drive the market for vanadium, emerging battery technologies will likely add to the demand for this critical metal.

One such technology, is vanadium redox-flow batteries (VRBs). These batteries, which use vanadium in solution as both the anode and cathode, could be the answer for storing large amounts of electricity that could be fed into power-grids when the need arises.

"Because of their large-scale storage capacity, development of VRBs could prompt increases in the use of wind, solar, and other renewable, intermittent power sources," USGS wrote.

Taking advantage of vanadium's ability to exist in solution in four different oxidation states, the vanadium redox battery uses vanadium in two of these states as electroactive elements, instead of separate elements for the cathode and anode.

The amount of energy a VRB can store is really only limited by the size of the storage tank built to hold the vanadium solutions, which are separated by a proton-exchange membrane.

These batteries can also remain completely uncharged over an extended period without major effects, another advantage that makes them particularly well suited for backup electrical storage.

The disadvantages are that these VRBs store relatively small amount of energy for their size and weight, making them less useful for mobile applications such as electric vehicles.

This does not mean vanadium will not be used to power future cars.

"Lithium-vanadium-phosphate batteries produce high voltages and high energy-to-weight ratios, which make them ideal for use in electric cars," USGS penned.

In these batteries, the lithium-vanadium phosphate serves as the cathode, and lithium metal serves as the anode.

While still early stage, this adds to the reason mining companies are looking for new supplies of vanadium.

Vanadium on Alaska's coast

Australia-based Northern Cobalt has identified a potential coastal source of vanadium about 30 miles of Juneau, Alaska's capital city.

Seeking potential deposits of metals essential to renewable energy led this mineral exploration company to Snettisham, a large outcropping body of magnetite with iron, titanium, vanadium, and possibly platinum-group elements.

This intrusion extends for at least 3,800 meters along the coast of the Snettisham Peninsula and up to 1,500 meters inland.

Historical magnetite-rich rock chip samples from this prospect have returned values as high as 0.34 percent vanadium pentoxide and 5 percent titanium dioxide; and 0.56 percent vanadium pentoxide and 6.5 percent titanium dioxide.

Northern Cobalt said Snettisham enjoys the advantage of being located on the Pacific Rim coast, adjacent to a deep-water channel capable of hosting Panamax and Cape class vessels that could ship iron-, titanium- and vanadium-rich magnetite concentrates to market.

Given that such a large, easily accessible prospect with these grades is open to staking, Northern Cobalt could not pass it up.

The Aussie company staked claims covering the Snettisham occurrence late in 2018 and flew a magnetic survey over the property early in 2019.

"The sheer magnitude of the magnetic anomaly at Snettisham gives Northern Cobalt a good indication of significant concentrations and volume of vanadium bearing magnetite in the intrusion," Northern Cobalt Managing Director Michael Schwarz said of the initial results from the geophysical survey.

Northern Cobalt plans to use the results to target a drill program this summer.

Hints of vanadium elsewhere

In addition to magnetite deposits like Snettisham and other similar occurrences in Southeast Alaska, vanadium is sometimes found in platinum group metal-bearing mafic intrusive rocks and sandstone-hosted uranium deposits.

A 1990s investigation by the now idled U.S. Bureau of Mines found Wiseman, a road accessible gold mining district about 180 miles northwest of Fairbanks, and Eagle, a region near the state's eastern border with Yukon, as particularly good areas to look for vanadium.

Data collected during the National Uranium Resource Evaluation, a 1970s federal initiative to identify domestic uranium resources, indicated widespread vanadium anomalies in stream sediments in the Wiseman area and rock samples collected there contained as much as 1 percent vanadium.

In the Eagle area, vanadium associated with uranium and copper was identified at the Road River formation. Samples containing as much as 0.2 percent vanadium, 188 parts per million uranium and 0.14 percent copper were collected during the 1990s investigation by USBM.

Hints of vanadium have also been found at the Death Valley uranium deposit on the Seward Peninsula in western Alaska.

Author Bio

Shane Lasley, Publisher

Author photo

Over his more than 16 years of covering mining and mineral exploration, Shane has become renowned for his ability to report on the sector in a way that is technically sound enough to inform industry insiders while being easy to understand by a wider audience.

 

Reader Comments(0)

 
 
Rendered 12/26/2024 00:01